[Gmsh] Defining Mesh

[Thomas Bernhardt]

I am finding that I can define a compound surface and instead of a bunch of
separate meshes it treats it as one mesh but the points from the original
surface divisions remain.  So the problem is that the mesh is defined based
on points. The one mesh is the same as the original broken up meshes. The
mesh will still be smaller on the part of the compound surface that used to
be a smaller surface because points are closer together. Any fix for this?
Thanks for your help!

Thomas Bernhardt

On Tue, Mar 10, 2015 at 10:23 AM, David Bernstein <
David.Bernstein at meliorinnovations.com> wrote:

> Hi Thomas, Take a look at the Compound Line/Surface/Volume entities in
> Gmsh.  These will probably do what you want.
>
> Regards,
> Dave
>
>
> > On Mar 10, 2015, at 7:42 AM, Thomas Bernhardt <tzbernhardt at gmail.com>
> wrote:
> >
> > Hello,
> > I am trying to create a mesh in gmsh of a model that I have imported.
> The problem that I find is that every line in the model divides the mesh.
> Is there a way to mesh the whole surface as one body ignoring the lines
> that divide parts. For example on a simple aircraft model there will be a
> line dividing the metal surface from the glass of the cockpit. However,
> when defining a mesh I want to ignore this division and treat it as one
> single surface. Thanks for any help you can provide.
> >
> > Thomas Bernhardt
> > This e-mail is covered by the Electronic Communication Privacy Act, 18
> U.S.C. Section 2510-2521 and may be legally privileged. If you have
> received this transmission in error, please notify the original sender
> immediately by return e-mail or by telephone at the telephone number
> provided above and delete/trash the original message from your system.
> Thank you for your assistance. The information contained herein is
> confidential information provided only for the use of the individual or
> entity for whom it was intended. If the reader of this message received it
> in error, is not the intended recipient, or if an attachment is made in
> error, the reader is hereby notified that any dissemination, distribution
> or copying of this communication is strictly prohibited.
> > _______________________________________________
> > gmsh mailing list
> > gmsh at geuz.org
> > http://www.geuz.org/mailman/listinfo/gmsh
>
> This e-mail is covered by the Electronic Communication Privacy Act, 18
> U.S.C. Section 2510-2521 and may be legally privileged. If you have
> received this transmission in error, please notify the original sender
> immediately by return e-mail or by telephone at the telephone number
> provided above and delete/trash the original message from your system.
> Thank you for your assistance. The information contained herein is
> confidential information provided only for the use of the individual or
> entity for whom it was intended. If the reader of this message received it
> in error, is not the intended recipient, or if an attachment is made in
> error, the reader is hereby notified that any dissemination, distribution
> or copying of this communication is strictly prohibited.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20150310/ed7f5d03/attachment.html>