[Gmsh] meshing more than one volume in contact

[Γεώργιος Μαζανάκης]

Hello, I have create a bridge geometry in autocad and i have export an iges
file (see attachment)
The geometry consist from the column, the deck and the prestressing
tendons. I use and a merge file so I can control the element size and the
physical volumes.

I want to create a 3d mesh but the problem is that I have more than one
volumes and the gmsh create very small elements for the tendors and large
elements for all the others with without keep the conections between two
meshes.

Can you help me ?
Thanks a lot
-------------------------------------------------------------------
--------------------------------------------------------------
-----------------
Mazanakis I.George
                        Μαζανάκης Γεώργιος
MSc Civil Engineering of N.T.U.A.
     Πολιτικός Μηχανικός Ε.Μ.Π, MSc
PhD candidate of T.U.C.
      Υπ.Διδάκτωρ Πολυτεχνείου Κρήτης
An. Gogoni 19  Chania,
                             Αν. Γογονή 19 Χανιά
Creta, Greece 73300
                                          Χανιά 73300
Tel:6973774576/2821088069
          Τηλ. 2821088069/6973774576
-------------------------------------------------------------------
--------------------------------------------------------------
-----------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160413/84b71366/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bridge_two_merge.geo
Type: application/octet-stream
Size: 41864 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20160413/84b71366/attachment-0001.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bridge_two.iges
Type: model/iges
Size: 1439358 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20160413/84b71366/attachment-0001.iges>