[Gmsh] reading stl and meshing

[Christophe Geuzaine]

> On 19 Sep 2016, at 17:39, Martin Genet <martin.genet at polytechnique.edu> wrote:
> 
> Dear all:
> 
> Attaching a gmsh script + stl that used to work fine (loading the stl, remeshing the surface and then meshing the volume), at least until 2.11 (see test.2.11.0.log), but not anymore (see test-2.13.2.log). I tried with 2.12.0, 2.13.0, 2.13.1, 2.13.2, but it just hangs after "Re-orient all 0 face normals coherently". Any idea on what might be going on? Thanks a lot!
> 

Indeed, that's a regression. We are currently rewriting the STL remesher from scratch - this will soon be ready in "beta" and should be much more robust than the old code.


> Martin
> 
> 
> <test.geo><test.stl><test-2.11.0.log><test-2.13.2.log>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info