[Gmsh] problem in characteristic mesh value in gui

[andrew]

I noticed it.

Thank you very much

andrew


2017-01-04 12:59 GMT+02:00 Christophe Geuzaine <cgeuzaine at ulg.ac.be>:

>
> Hi Andrew - the latest version fixes this.
> Thanks,
> Christophe
>
> > On 21 Dec 2016, at 21:23, andrew <armitatz at gmail.com> wrote:
> >
> > Hi,
> >
> > When I load a file with the line 'Mesh.CharacteristicLengthFactor =
> 0.001;' in the gui in Options/Mesh/Element size factor it shows as 0.00.
> The digits are truncated and I have to change the value because if I forget
> it and I start the meshing it goes on forever. Is there a way to have gmsh
> to not truncate small values to 2 digits?
> >
> > kind regards
> >
> > andrew tsiantis
> >
> > _______________________________________________
> > gmsh mailing list
> > gmsh at onelab.info
> > http://onelab.info/mailman/listinfo/gmsh
>
> --
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20170104/169547b7/attachment.html>