[Gmsh] Merging several geometries ?

[David Colignon]

On 31/01/17 18:38, Rémi COQUARD wrote:
> Dear,
>
> I'm a recent user of you Gmsh software.
> I use it for the meshing of complex volumes that can actually be obtained by merging simpler individual particles (for example spheres and
> circualr cylinders).
> Therefore, I wonder if your software allows to create a geometry (volume) by merging (or "soldering") several geometries previously created by
> classical commands (such as extrusion ....) ?

http://gmsh.info/doc/texinfo/gmsh.html#and-what-Gmsh-is-not-so-good-at

>
> The final objective is to mesh the complex volume in 3-D elements
>
> Thank you by advance for your attention and assistance
>
> Rémi Coquard
> Research Engineer
> Tél : 04 37 48 84 37
> Fax : 04 37 48 84 05
> Site : *_www.ec2-modelisation.fr <http://www.ec2-ms.fr>_*
> 66, bd Niels Bohr 69 603 Villeurbanne Cedex
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>