[Gmsh] Physical Volume via command line

[David Colignon]

Hi,

See  http://gmsh.info/doc/texinfo/gmsh.html#index-_002dstring-_0022string_0022

-string "string"

     Parse command string at startup


Regards,

Dave

-- 
David Colignon, Ph.D.
1er Logisticien de Recherche
Université de Liège
ACE - Applied & Computational Electromagnetics
Quartier POLYTECH 1 - Montefiore B28
Allée de la découverte 10
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
http://www.ulg.ac.be/nic4

On 24/11/17 15:39, jenscfel wrote:
> Hi Gmsher,
> 
> I try to create an inp.-file with gmsh, which I can open in LS-PrePost. For that I just want to use the command line.
> Currently I can open the stp.-file in gmsh, mesh it and create an output file with the following commands:
> 
> Desktop\gmsh Desktop\example.stp -3 -o Desktop\example.inp
> 
> To import the mesh into LS-PrePost I have to define the geometry as a Physical Volume. Now the question:
> Is there a command to create the Physical Volume without using the GUI?
> (I don´t want to type it in the geo.-file.)
> 
> I really appreciate your help.
> 
> Kindly regards
> Felix
> 
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh