[Gmsh] Combine two extruded volumes

Phu Nguyen phu.nguyen at monash.edu
Wed Apr 3 04:06:27 CEST 2019

Dear all,

I am trying to mesh a (half) cylinder with a strap around it. See attachment. I made a surface for the cylinder, and extruded it to get the cylinder. Then I made another surface and extruded for the strap.

Then, I meshed the resulting volumes and observe that the cylinder mesh and the strap mesh are independent of each other. What I need is that the strap is glued to the cylinder. How can it be done?

Thanks for your time.

Best regards,

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190403/c61f9d76/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2019-04-03 at 1.03.49 pm.png
Type: image/png
Size: 301804 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20190403/c61f9d76/attachment-0001.png>

More information about the gmsh mailing list