[Gmsh] Error message in Gmsh

[Anani DJATO]

 I am using Gmsh 4.3.0.
I attached the .geo and .msh file that generated this error messag

Thanks,
Anani DJATO




    Le mercredi 21 août 2019 à 14:52:38 UTC+2, Christophe Geuzaine <cgeuzaine at uliege.be> a écrit :  
 
 

> On 21 Aug 2019, at 11:42, Anani DJATO <anani.djato at yahoo.fr> wrote:
> 
> Hello Gmsh users,
> 
> I am beginner in Gmsh.
> I would like to know if somebody can tell me how to avoid the following message error in Gmsh: 
> 

In which version of Gmsh? Can you send an input file that exhibits the issue?

Christophe


> INPUT ERROR :
> Wrong initial configuration: a slave node belongs to the master surface.
> 
> Thanks
> Anani DJATO
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190821/1c7615c9/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: charpy_simple.geo
Type: application/vnd.dynageo
Size: 3481 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20190821/1c7615c9/attachment-0001.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: charpy_simple.msh
Type: model/mesh
Size: 2156943 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20190821/1c7615c9/attachment-0001.msh>