[Gmsh] Generate a CFD mesh

李昊 lihao71862b at gmail.com
Sun Aug 9 13:31:01 CEST 2020


Dear Gmsh developers,

We would like to generate a high-quality mesh for the
Fluid-structure-interaction simulation.
The Geometry is read from a CAD file (step). The inner block in the red
circle is the solid domain and the outer block is the fluid domain.
We hope to refine the mesh only on the fluid-solid interface while
remaining the coarse meshes in the rest of the domains. Is it possible to
do that?
The geo file is attached.
[image: image.png]

Thanks very much in advance!

Sincerely yours,
Hao
-- 
李昊 LI HAO
Manufacturing Systems Engineering Laboratory (Nishiwaki Lab)
Department of Mechanical Engineering and Science
Graduate School Of Engineering
Kyoto University
Ph.D Student
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200809/71ef5791/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 82407 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200809/71ef5791/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Part1.geo
Type: application/octet-stream
Size: 100 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200809/71ef5791/attachment-0001.geo>


More information about the gmsh mailing list