[Getdp] Issue building and installing GetDP from Source

[Ruth Vazquez Sabariego]

Hi  Diogo,

Are your environmental variables properly defined?
Have a look at
http://onelab.info/wiki/GetDP

Once PETSc is installed, PETSC_DIR and PETSC_ARCH have to be available for compiling GetDP with PETSc.

Best regards,
Ruth

—
Prof. Ruth V. Sabariego
KU Leuven
Dept. Electrical Engineering ESAT/Electa, EnergyVille
http://www.esat.kuleuven.be/electa
http://www.energyville.be

Free software: http://gmsh.info | http://getdp.info | http://onelab.info







On 15 May 2017, at 18:49, Diogo Pinto <diomarti at ulb.ac.be<mailto:diomarti at ulb.ac.be>> wrote:

Hi all,

I wanted to build GetDP from source (on a mac but same error on Linux) but I encounter an error when running the make command. I installed PETSc which automatically downloaded BLAS/LAPACK  with the command :
        ./configure --with-cc=gcc --with-cxx=g++ --with-fc=gfortran --download-mpich --download-fblaslapack

When running cmake on GetDP, the different compilers and required packages (PETSc, BLAS/LAPACK) are found on the system. However when running make, there is an error popping up stating that there is a header file (petscconf.h) missing.

Did someone encounter this issue before, if yes what has to be done to solve this ?

Thanks in advance,
Diogo Pinto

-------------------------------------------------------
Phd Student

BEAMS Department
Université Libre de Bruxelles
Avenue Franklin Roosevelt 50
1050 Bruxelles (Belgium)
Email : diomarti at ulb.ac.be<mailto:diomarti at ulb.ac.be>


_______________________________________________
getdp mailing list
getdp at onelab.info<mailto:getdp at onelab.info>
http://onelab.info/mailman/listinfo/getdp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/getdp/attachments/20170515/510f260c/attachment-0001.html>