[Gmsh] Trouble with mesh-files

[Christophe Geuzaine]

> On 6 Aug 2018, at 08:54, Adrian Braa <frank.a.braa at ntnu.no> wrote:
> 
> Hello.
>  
> I work for the local IT at NTNU EPT and I have a question regarding an issue one of the employees here have had with your program.
> The client is looking after a “Save as” option, in order to be able to save the files as “.msh”-files, but this feature is omitted, despite being referenced in guides and
> tutorials online. Would this brief explanation give you any idea of what’s going on?

The menu has been renamed "File->Export" in Gmsh 3.

To save a mesh with the default file name and format, you can also directly use "File->Save mesh".

CG

> I have tried a couple things, for example specifying that it has to be a mesh-file when clicking “New file” or editing the file-extension to the ones that don’t work, but all of it has been to no use. Files that have been made by others work, by the way.
> Apparently his situation is pretty urgent as well, so a quick response would be nice.
>  
> Best Regards
>  
> Adrian Braa | IT Apprentice | Tlf: 91897258
>  
>  
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info