[Gmsh] Point In Surface trouble with version 2.7.2

[Christophe Geuzaine]

Hi Jean-Pierre - This regression should be fixed in Gmsh 2.8.

Thanks for the report,

Christophe

On 25 Jun 2013, at 12:57, jean pierre aubry <jeanpierre at lamachine.fr> wrote:

> hello
> 
> i replayed and old .geo file and found this strange behavior of
> Point{60} In Surface{311};
> i looks like the characteristic length around this Point is bypassed
> Point 60 is the middle of the yellow surface 311
> this happens with   2.7.2 Build date 20130606 
> and not with 2.7.0 Build date 201303013 
> 
> see attached view of the mesh
> 
> jean pierre aubry<characteristic_length.png>_______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine